mrc-logo.gif (9442 bytes)

back.gif (599 bytes)

NCE Main

 

Power House Pro.

 
 

Power House Pro 5 and 10 Amp

The Power Pro is the most user friendly DCC system on the market. The Pro-Cab walks you through every operation with clearly labeled buttons and well thought out menu prompts in plain English on its backlit LCD display. The most often performed operations usually are just a single key press. The Power Pro is never obsolete.

Plug in chips allow you to update the system when they are available and all our units have the new 12/04 software update. No need to return the unit to the factory. The Power Pro starter set has everything you need to get DCC equipped trains up and running (except power transformer).

It includes the user friendly Pro Cab and Command Station with integral Five Amp power unit. The Quick Start Guide in our system reference manual will have you up and running in less than 20 minutes.  The PH-Pro is perfect for the smallest home layout to the largest multi-room club empire.

Power Pro Command Station Specifications:

  • Cabs: 60 maximum

  • Number of simultaneous trains: 250

  • Number of consists: 127 of unlimited number of locomotives each

  • Range of locomotive addresses: 0-9999

  • Range of consist addresses: 1-127

  • Range of accessory addresses: 1-2044

  • Computer interface: Included

  • Five Amp Power Station Specifications:

  • Continuous Output Current: 5.14 Amps

  • Power requirements: 15VAC, 5 Amps [18VAC no load maximium]

  • Short circuit handling: Automatic shutdown after 500mS of short circuit

  • Output voltage: Factory set to 14.25 Volts, adjustable 9.5 to 18 Volts

Pro Cab Specifications:

  • Speed control: Thumbwheel operated digital encoder with adjustable ballistic tracking rate. Plus pushbutton speed control with adjustable auto-repeat rate (4 pulses per second to one pulse per 4 seconds).

  • Backlit LCD Display: 2 line by 16 characters/line. Two extra display lines available for
    display of additional information when used with computer dispatcher programs.

Powerhouse Pro Set Includes:

  • CS01 Command Station/Booster
  • ProCab Controller
  • Coil Cord for ProCab
  • UPT Panel connector / cable
  • Complete Manual Set
  • Requires 15VAC power supply not included

Powerhouse Pro-R 5 amp
The Power Pro-R starter set is also available as a radio equipped system. It is designed to eliminate the need for a tethered throttle. All features of the Pro Cab are usable while in radio mode. (Requires four AAA cell batteries) Additional radio Pro Cabs and Cab 04s can also be used. Both tethered and radio cabs can be used simultaneously.

Powerhouse Pro Radio Set Includes:

  • CS01 Command Station/Booster
  • ProCab Controller
  • Coil Cord for ProCab
  • RB01 Radio Base Station
  • 3' RJ12 Cable for RB01
  • 2 900MHz Hi-Gain Antennas
  • UPT Panel connector/cable
  • Complete Manual Set
  • Requires 15VAC power supply not included